Design of PV fed single-switch transformer less topology powered electric vehicle
DOI:
https://doi.org/10.32397/tesea.vol5.n2.571Keywords:
Solar PV, Electric Vehicle, Brushless DC Motor, Single-SwitchAbstract
As a result of an increase in the availability of resources that were not harmful to the environment, solar energy applications shot to popularity. Photovoltaic cells power systems that necessitate DC-DC converters because of their low voltage output. This investigation uses photovoltaic cells (PV) to power a high-voltage gain design with just one switch and no transformer. The proposed circuit utilizes a single regulated switch, which contributes to a reduction in switching losses. It requires fundamental pulse regulation. The network used a switched capacitor cell and an LC passive filter to provide an accurate step-up voltage. We can obtain the equation for the step-up voltage gain from the steady-state continuous conduction mode. The equations used for the theoretical design of converters include energy. To show that the topology is comparable with other modern converters that have been published, a comparison was made between it and other converters. In order to validate the converter's effectiveness, simulations built in MATLAB and Simulink are used.
Downloads
References
Wuhua Li and Xiangning He. Review of nonisolated high-step-up dc/dc converters in photovoltaic grid-connected applications. IEEE Transactions on Industrial Electronics, 58(4):1239–1250, April 2011.
T. Sreekanth, N. Lakshminarasamma, and Mahesh K. Mishra. A single-stage grid-connected high gain buck–boost inverter with maximum power point tracking. IEEE Transactions on Energy Conversion, 32(1):330–339, March 2017.
Sandeep Anand, Saikrishna Kashyap Gundlapalli, and B. G. Fernandes. Transformer-less grid feeding current source inverter for solar photovoltaic system. IEEE Transactions on Industrial Electronics, 61(10):5334–5344, October 2014.
Rohit Suryadevara and Leila Parsa. Full-bridge zcs-converter-based high-gain modular dc-dc converter for pv integration with medium-voltage dc grids. IEEE Transactions on Energy Conversion, 34(1):302–312, March 2019.
Roger Gules, Walter Meneghette Dos Santos, Flavio Aparecido Dos Reis, Eduardo Felix Ribeiro Romaneli, and Alceu Andre Badin. A modified sepic converter with high static gain for renewable applications. IEEE Transactions on Power Electronics, 29(11):5860–5871, November 2014.
Neyyala Raju, N. Murali Mohan, and Vijay Kumar. A switched-inductor switched-capacitor based ultra-gain boost converter: analysis and design. TESEA, Transactions on Energy Systems and Engineering Applications, 5(1):1–20, February 2024.
Gang Wu, Xinbo Ruan, and Zhihong Ye. Nonisolated high step-up dc–dc converters adopting switched-capacitor cell. IEEE Transactions on Industrial Electronics, 62(1):383–393, January 2015.
L Sri Sivani, L Nagi Reddy, BK SubbaRao, and A Pandian. A new single switch ac/dc converter with extended voltage conversion ratio for smps applications. Int. Journal of Innovative Technology and Exploring Engineering, 8(3):68–72, 2019.
Farzad Mohammadzadeh Shahir, Ebrahim Babaei, and Murtaza Farsadi. Voltage-lift technique based nonisolated boost dc–dc converter: Analysis and design. IEEE Transactions on Power Electronics, 33(7):5917–5926, July 2018.
Qian Li, Yigeng Huangfu, Liangcai Xu, Jiang Wei, Rui Ma, Dongdong Zhao, and Fei Gao. An improved floating interleaved boost converter with the zero-ripple input current for fuel cell applications. IEEE Transactions on Energy Conversion, 34(4):2168–2179, December 2019.
M. Lakshmi and S. Hemamalini. Nonisolated high gain dc–dc converter for dc microgrids. IEEE Transactions on Industrial Electronics, 65(2):1205–1212, February 2018.
B. Nagi Reddy, K. Badrinath Shetty, Radhika Jalli, K. Akhila, K. Sai Prudhviraj, and Vadthya Jagan. Reduced redundant power processing in dc-dc converters: A comprehensive review. February 2024.
J.C. Rosas-Caro, J.M. Ramirez, F.Z. Peng, and A. Valderrabano. A dc–dc multilevel boost converter. IET Power Electronics, 3(1):129, January 2010.
Mohammad Reza Banaei, Hossein Ardi, and Amir Farakhor. Analysis and implementation of a new single-switch buck–boost dc/dc converter. IET Power Electronics, 7(7):1906–1914, July 2014.
Ping Wang, Lei Zhou, Yun Zhang, Jing Li, and Mark Sumner. Input-parallel output-series dc-dc boost converter with a wide input voltage range, for fuel cell vehicles. IEEE Transactions on Vehicular Technology, 66(9):7771–7781, September 2017.
Lukas Muller and Jonathan W. Kimball. High gain dc–dc converter based on the cockcroft–walton multiplier. IEEE Transactions on Power Electronics, 31(9):6405–6415, September 2016.
Nagi Reddy B, Sahithi Priya Kosika, Manish Patel Gadam, Jagadhishwar Banoth, Ashok Banoth, and Srikanth Koundinya. Analysis of positive output buck-boost topology with extended conversion ratio. Journal of Energy Systems, 6(1):62–83, March 2022.
Kerui Li, Yafei Hu, and Adrian Ioinovici. Generation of the large dc gain step-up nonisolated converters in conjunction with renewable energy sources starting from a proposed geometric structure. IEEE Transactions on Power Electronics, 32(7):5323–5340, July 2017.
Faqiang Wang. A novel quadratic boost converter with low current and voltage stress on power switch for fuel-cell system applications. Renewable Energy, 115:836–845, January 2018.
Neng Zhang, Guidong Zhang, KhayWai See, and Bo Zhang. A single-switch quadratic buck–boost converter with continuous input port current and continuous output port current. IEEE Transactions on Power Electronics, 33(5):4157–4166, May 2018.
Yun Zhang, Heyu Liu, Jing Li, Mark Sumner, and Changliang Xia. Dc–dc boost converter with a wide input range and high voltage gain for fuel cell vehicles. IEEE Transactions on Power Electronics, 34(5):4100–4111, May 2019.
Yuanwei Gu, Yanfeng Chen, Bo Zhang, Dongyuan Qiu, and Fan Xie. High step-up dc-dc converter with active switched lc-network for photovoltaic systems. IEEE Transactions on Energy Conversion, 34(1):321–329, 2018.
Marcos Antonio Salvador, Telles Brunelli Lazzarin, and Roberto Francisco Coelho. High step-up dc–dc converter with active switched-inductor and passive switched-capacitor networks. IEEE Transactions on Industrial Electronics, 65(7):5644–5654, July 2018.
Ebrahim Babaei, Hamed Mashinchi Maheri, Mehran Sabahi, and Seyed Hossein Hosseini. Extendable nonisolated high gain dc–dc converter based on active–passive inductor cells. IEEE Transactions on Industrial Electronics, 65(12):9478–9487, December 2018.
B. Nagi Reddy, G. Vinay Kumar, B. Vinay Kumar, B. Jhansi, B. Sandeep, and K. Sarada. Fuel cell based ultra-voltage gain boost converter for electric vehicle applications. TESEA, Transactions on Energy Systems and Engineering Applications, 4(1):68–90, June 2023.
Mohammad Maalandish, Seyed Hossein Hosseini, Tohid Jalilzadeh, and Naser Vosoughi. High step-up dc–dc converter using one switch and lower losses for photovoltaic applications. IET Power Electronics, 11(13):2081–2092, September 2018.
Farzad Mohammadzadeh Shahir, Ebrahim Babaei, and Murtaza Farsadi. Extended topology for a boost dc–dc converter. IEEE Transactions on Power Electronics, 34(3):2375–2384, March 2019.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Jeetender Vemula, E. Vidya Sagar, Tellapati Anuradha Devi, Gundala Srinivasa Rao, Rekha Rangam, S. Venkata Rami Reddy
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License, which allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
